OF302氣動機油泵浦
特點：
（1）泵浦作動及抽油為兩個獨立系統，壓縮空氣不會污染桶內油脂。
（2）典型的使用范圍為工廠、汽修廠、船舶保養、采礦、機械、農耕、軍隊、建筑、大眾運輸等。
（3）使用氣動泵浦，不須電力，可使用于有易燃物品的場所，如：加油站、汽車保養廠等場所。
（4）泵浦本體材質采用高強度鋁合金鍛造成型。
用油：
壓力比5：1適用于抽取0#~120#機油，及一般非腐蝕性溶劑。
壓力比16：1適用于抽取140#~200#齒輪油，及一般非腐蝕性溶劑。
若要知道所添加的油量，建議加購流量表使用。（型號：M101、M201共二種可參考）
若需延伸到較遠距離時，建議加購卷揚器使用。（型號：RE020）
Feature
(1) the pumping action and pumping into two independent system, compressed air will not pollute the barrel of oil.
(2) using the range typical for factories, auto repair factory, ship maintenance, mining, machinery, agriculture, military, architecture, public transportation.
(3) the use of pneumatic pump, without power, can be used in flammable goods place, such as: gas station, garage and other places.
(4) the pump body is made of high strength aluminum alloy forging.
Oil usage
(1) pressure ratio 5:1 is applied to extract the 0#~120# oil, and generally non-aggressive solvent.
(2) pressure ratio 16:1 is applied to extract the 140#~200# gear oil, and generally non-aggressive solvent.
(3) if you want to know the added quantity of the oil, and suggestions to buy flow meter use. (model: M101, M201 a total of two kinds of reference)
(4) if you need to extend to the distant, advice plus windlass used. (model: RE020)
（1）泵浦作動及抽油為兩個獨立系統，壓縮空氣不會污染桶內油脂。
（2）典型的使用范圍為工廠、汽修廠、船舶保養、采礦、機械、農耕、軍隊、建筑、大眾運輸等。
（3）使用氣動泵浦，不須電力，可使用于有易燃物品的場所，如：加油站、汽車保養廠等場所。
（4）泵浦本體材質采用高強度鋁合金鍛造成型。
用油：
壓力比5：1適用于抽取0#~120#機油，及一般非腐蝕性溶劑。
壓力比16：1適用于抽取140#~200#齒輪油，及一般非腐蝕性溶劑。
若要知道所添加的油量，建議加購流量表使用。（型號：M101、M201共二種可參考）
若需延伸到較遠距離時，建議加購卷揚器使用。（型號：RE020）
Feature
(1) the pumping action and pumping into two independent system, compressed air will not pollute the barrel of oil.
(2) using the range typical for factories, auto repair factory, ship maintenance, mining, machinery, agriculture, military, architecture, public transportation.
(3) the use of pneumatic pump, without power, can be used in flammable goods place, such as: gas station, garage and other places.
(4) the pump body is made of high strength aluminum alloy forging.
Oil usage
(1) pressure ratio 5:1 is applied to extract the 0#~120# oil, and generally non-aggressive solvent.
(2) pressure ratio 16:1 is applied to extract the 140#~200# gear oil, and generally non-aggressive solvent.
(3) if you want to know the added quantity of the oil, and suggestions to buy flow meter use. (model: M101, M201 a total of two kinds of reference)
(4) if you need to extend to the distant, advice plus windlass used. (model: RE020)
| 型號 Model | 容量 Capacity | 空氣輸入壓力 Air Input Pressure | 壓力比 Pressure Ratio | 機油輸出壓力 Oil Output Pressure | 輸出量 Deliver Rate | 淨重 N.W. | 毛重 G.W. | 材積 CUFT |
| OF301 | 200L | 4～9 bar 60～130 psi | 5:1 | 20～45 bar 300～650 psi | 140 c.c/cycle | 15.6 kgs | 16.7 kgs | 1.2' |
| OF302 | 16:1 | 64～144 bar 960～2080 psi | 80 c.c/cycle | 16.1 kgs | 17.2 kgs |
- 上一篇：A95-O氣動機油泵浦
- 下一篇：OF301氣動機油泵浦
